Welding Techniques, Gear, and Safety Essentials

Unbranded leaf-style fillet weld gauges resting beside a cooled steel T-joint and a closed storage pouch.

Fillet Weld Gauges: Range, Units and Buying Checks

Choose a fillet weld gauge by required sizes, units, joint access and inspection needs. Check the Profax WFG package and understand the limits of a gauge reading.

Fillet Weld Gauges: Range, Units and Buying Checks

Choose a fillet weld gauge by required sizes, units, joint access and inspection needs. Check the Profax WFG package and understand the limits of a gauge reading.

Unbranded locking C-clamp pliers with round tips and swivel pads resting beside steel coupons on an inactive workbench.

Locking C-Clamps: PR115 Round Tips vs. PR115S Swivel Pads

Compare PR115 round-tip and PR115S swivel-pad locking C-clamps. Check jaw opening, throat reach, contact surfaces and safe workholding before ordering.

Locking C-Clamps: PR115 Round Tips vs. PR115S Swivel Pads

Compare PR115 round-tip and PR115S swivel-pad locking C-clamps. Check jaw opening, throat reach, contact surfaces and safe workholding before ordering.

Unbranded twist drill bits of different lengths beside a drilled steel bracket and clear safety glasses on an inactive workbench.

Mechanics-Length vs. Jobber Drill Bits: Reach and Fit Checks

Choose drill length by usable reach, chuck fit and the actual hole requirement. Includes Drillco 350N29 package checks and safe drill-press setup guidance.

Mechanics-Length vs. Jobber Drill Bits: Reach and Fit Checks

Choose drill length by usable reach, chuck fit and the actual hole requirement. Includes Drillco 350N29 package checks and safe drill-press setup guidance.

electrode holder

Electrode Holders: How to Choose the Right Welding Electrode Holder

Choosing the right electrode holder is an important part of setting up a stick welding system. It might seem like a simple tool, but the holder plays an important role...

Electrode Holders: How to Choose the Right Welding Electrode Holder

Choosing the right electrode holder is an important part of setting up a stick welding system. It might seem like a simple tool, but the holder plays an important role...

Illustrative unbranded cup-style torch spark lighter, viewed from the back, beside leather gloves on an inactive workbench.

Single-Flint vs. Three-Flint Torch Spark Lighters: Buying Checks

Compare torch spark-lighter designs, match replacement flints to the actual maker and model, and distinguish ten-lighter boxes from renewal-flint packages.

Single-Flint vs. Three-Flint Torch Spark Lighters: Buying Checks

Compare torch spark-lighter designs, match replacement flints to the actual maker and model, and distinguish ten-lighter boxes from renewal-flint packages.

Illustrative unbranded engine filters and spark plugs beside a service notebook, with an inactive welder in the background.

Engine-Driven Welder Tune-Up Kits: Check Fit Before Buying

Match a welder tune-up kit to the machine serial number and installed engine configuration. Use this practical checklist before choosing Miller 180096 or another kit.

Engine-Driven Welder Tune-Up Kits: Check Fit Before Buying

Match a welder tune-up kit to the machine serial number and installed engine configuration. Use this practical checklist before choosing Miller 180096 or another kit.